chore(metadata): Typos (#2595)

Co-authored-by: Pepe Fagoaga <pepe@verica.io>

docs/index.md

@@ -237,7 +237,7 @@ prowler azure --excluded-services defender iam
 prowler gcp --excluded-services kms
 ```
 
-More options and executions methods that will save your time in [Miscelaneous](tutorials/misc.md).
+More options and executions methods that will save your time in [Miscellaneous](tutorials/misc.md).
 
 You can always use `-h`/`--help` to access to the usage information and all the possible options:
 

docs/tutorials/aws/cloudshell.md

@@ -1,6 +1,6 @@
 # AWS CloudShell
 
-Prowler can be easely executed in AWS CloudShell but it has some prerequsites to be able to to so. AWS CloudShell is a container running with `Amazon Linux release 2 (Karoo)` that comes with Python 3.7, since Prowler requires Python >= 3.9 we need to first install a newer version of Python. Follow the steps below to successfully execute Prowler v3 in AWS CloudShell:
+Prowler can be easily executed in AWS CloudShell but it has some prerequisites to be able to to so. AWS CloudShell is a container running with `Amazon Linux release 2 (Karoo)` that comes with Python 3.7, since Prowler requires Python >= 3.9 we need to first install a newer version of Python. Follow the steps below to successfully execute Prowler v3 in AWS CloudShell:
 
 - First install all dependences and then Python, in this case we need to compile it because there is not a package available at the time this document is written:
 ```

docs/tutorials/aws/multiaccount.md

@@ -41,7 +41,7 @@ for accountId in $ACCOUNTS_LIST; do
 done
 ```
 
-## Scan mutiple accounts from AWS Organizations in parallel
+## Scan multiple accounts from AWS Organizations in parallel
 
 - Declare a variable with all the accounts to scan. To do so, get the list of your AWS accounts in your AWS Organization by running the following command (will create a variable with all your ACTIVE accounts). Remember to run that command with the permissions needed to get that information in your AWS Organizations Management account.
 

docs/tutorials/aws/organizations.md

@@ -10,7 +10,7 @@ If you have AWS Organizations Prowler can get your account details like Account
 ```
 prowler aws -O arn:aws:iam::<management_organizations_account_id>:role/<role_name>
 ```
-> Make sure the role in your AWS Organizatiosn management account has the permissions `organizations:ListAccounts*` and `organizations:ListTagsForResource`.
+> Make sure the role in your AWS Organizations management account has the permissions `organizations:ListAccounts*` and `organizations:ListTagsForResource`.
 
 - In that command Prowler will scan the account and getting the account details from the AWS Organizations management account assuming a role and creating two reports with those details in JSON and CSV.
 

docs/tutorials/aws/securityhub.md

@@ -29,7 +29,7 @@ prowler -S -f eu-west-1
 
 > **Note 1**: It is recommended to send only fails to Security Hub and that is possible adding `-q` to the command.
 
-> **Note 2**: Since Prowler perform checks to all regions by default you may need to filter by region when runing Security Hub integration, as shown in the example above. Remember to enable Security Hub in the region or regions you need by calling `aws securityhub enable-security-hub --region <region>` and run Prowler with the option `-f <region>` (if no region is used it will try to push findings in all regions hubs). Prowler will send findings to the Security Hub on the region where the scanned resource is located.
+> **Note 2**: Since Prowler perform checks to all regions by default you may need to filter by region when running Security Hub integration, as shown in the example above. Remember to enable Security Hub in the region or regions you need by calling `aws securityhub enable-security-hub --region <region>` and run Prowler with the option `-f <region>` (if no region is used it will try to push findings in all regions hubs). Prowler will send findings to the Security Hub on the region where the scanned resource is located.
 
 > **Note 3**: To have updated findings in Security Hub you have to run Prowler periodically. Once a day or every certain amount of hours.
 

docs/tutorials/aws/v2_to_v3_checks_mapping.md

@@ -1,6 +1,6 @@
 # Check mapping between Prowler v3 and v2
 
-Prowler v3 comes with different identifiers but we maintained the same checks that were implemented in v2. The reason for this change is because in previows versions of Prowler, check names were mostly based on CIS Benchmark for AWS. In v3 all checks are independent from any security framework and they have its own name and ID.
+Prowler v3 comes with different identifiers but we maintained the same checks that were implemented in v2. The reason for this change is because in previous versions of Prowler, check names were mostly based on CIS Benchmark for AWS. In v3 all checks are independent from any security framework and they have its own name and ID.
 
 If you need more information about how new compliance implementation works in Prowler v3 see [Compliance](../../compliance/) section.
 

docs/tutorials/developer-guide.md

@@ -4,7 +4,7 @@ You can extend Prowler in many different ways, in most cases you will want to cr
 
 ## Get the code and install all dependencies
 
-First of all, you need a version of Python 3.9 or higher and also pip installed to be able to install all dependencies requred. Once that is satisfied go a head and clone the repo:
+First of all, you need a version of Python 3.9 or higher and also pip installed to be able to install all dependencies required. Once that is satisfied go a head and clone the repo:
 
 ```
 git clone https://github.com/prowler-cloud/prowler
@@ -229,7 +229,7 @@ If you want to create or contribute with your own security frameworks or add pub
 
 Each file version of a framework will have the following structure at high level with the case that each framework needs to be generally identified, one requirement can be also called one control but one requirement can be linked to multiple prowler checks.:
 
-- `Framework`: string. Indistiguish name of the framework, like CIS
+- `Framework`: string. Distinguish name of the framework, like CIS
 - `Provider`: string. Provider where the framework applies, such as AWS, Azure, OCI,...
 - `Version`: string. Version of the framework itself, like 1.4 for CIS.
 - `Requirements`: array of objects. Include all requirements or controls with the mapping to Prowler.
@@ -269,7 +269,7 @@ Finally, to have a proper output file for your reports, your framework data mode
 
 ## Contribute with documentation
 
-We use `mkdocs` to build this Prowler documentation site so you can easely contribute back with new docs or improving them.
+We use `mkdocs` to build this Prowler documentation site so you can easily contribute back with new docs or improving them.
 
 1. Install `mkdocs` with your favorite package manager.
 2. Inside the `prowler` repository folder run `mkdocs serve` and point your browser to `http://localhost:8000` and you will see live changes to your local copy of this documentation site.

docs/tutorials/pentesting.md

@@ -6,7 +6,7 @@ Prowler has some checks that analyse pentesting risks (Secrets, Internet Exposed
 
 Prowler uses `detect-secrets` library to search for any secrets that are stores in plaintext within your environment.
 
-The actual checks that have this funcionality are:
+The actual checks that have this functionality are:
 
 1. autoscaling_find_secrets_ec2_launch_configuration
 - awslambda_function_no_secrets_in_code

docs/tutorials/reporting.md

@@ -19,7 +19,7 @@ prowler <provider> -M csv json json-asff html -F <custom_report_name>
 ```console
 prowler <provider> -M csv json json-asff html -o <custom_report_directory>
 ```
-> Both flags can be used simultainously to provide a custom directory and filename.
+> Both flags can be used simultaneously to provide a custom directory and filename.
 ```console
 prowler <provider> -M csv json json-asff html -F <custom_report_name> -o <custom_report_directory>
 ```